The lens of the laser cutting machine is composed of a focusing mirror and a reflecting mirror, which is an important part of the laser machine. The requirements are strict during use. If this part is not installed in accordance with the prescribed steps, it is easy to cause deviation of the cutting center or even the edge of the cutting machine groove. So what aspects should be paid attention to when installing the laser cutting machine lens?　　The first step: Please wash your hands before ope

Laser cutting machine parameter setting (1) Compared with traditional cutting methods, laser cutting has obvious advantages. Due to its high precision and obvious narrow slit effect, laser cutting adopts non-contact technology processing. With the development of the manufacturing industry, the quality of laser cutting is increasingly required. Especially in the aviation field, when performing 3D laser cutting on complex curved sheet metal parts, it is necessary to adjust the posture and proces

Laser marking machine is also called laser marking machine, laser engraving machine and other names, but most people don’t understand the difference between fiber laser marking machine and CO2 laser marking machine. The technical staff will explain the difference between fiber laser marking machine and CO2 laser marking machine.

Fourth, the analysis test of the main factors affecting the quality of laser cuttingAccording to the analysis of factors that affect the quality of laser cutting, select the thermoformed parts with a thickness of 1.0～3.0mm for laser cutting test, and select the cutting block, cutting hole or cutting edge for analysis. The test procedure is as follows.1. Test the focus position and adjust according to the deviation of the focus. The focus position is gradually adjusted from 3mm to 3mm, with an i